Scientific SM6016, Руководство пользователя

Страница: 30 / 44

30 SM6016
7.4 Resistance Measurement
1. Press the POWER button for a long time to turn on the instrument.
2. Press the RPI button until “R” is displayed on the screen to select
inductance measurement.
3. Insert a resistor into test slots or connect a tested resistor through a
proper test accessory (e.g., banana plug-crocodile clip test leads, test
fixture or SMD test tweezers). See figures 15 below.
4. Press FREQ button until the desired test frequency is displayed on
screen.
5. Press the LEV button until the desired test level is displayed on screen.
6. Press the SEC button to select the desired secondary parameter.
7. Read the readings on LCD for resistance measured values.
NOTE: The meter uses an AC signal for measurement of resistance, so what the test
result shows is AC resistance property instead of DC resistance property.
Figure 15-Resistance Measurement
7.5 Impedance Measurement
1. Press the POWER button for a long time to turn on the instrument.
2. Press the PRI button until “Z” is displayed on the screen to select
impedance measurement.
3. Insert impedance (resistor, capacitor or inductor) into test slots or connect
tested impedance through a proper test accessory (i.e., banana plug-
crocodile clip test leads, test fixture or SMD test tweezers).
4. Press the FREQ button until the desired test frequency is displayed on
screen.
5. Press the LEV button until the desired test level is displayed on screen.
6. Press the SEC button to select the desired secondary parameter.
7. Read the readings on LCD for impedance measured values.