Assembly Guide
9
Step 9: Attach Rod Pack Bottom Plate to Rod Pack
Frame
Locate the following items:
• From
Step 7
- Rod Pack Bottom Plate with Resistance Rods
• From
Step 8
- Main Assembly
•
Item #C
- (4) 5/16" 3/4" Button Head Screws (from
Step 7
)
•
Item #K
- (4) 5/16" Washers (from
Step 7
)
Line up the Rod Pack Bottom Plate with Resistance Rods
(from Step 7) with the Rod Pack Frame, as shown in
Figure
9
. Larger Rods should be inserted into Rod Box Frame first.
Locate the (4) 5/16
"
X 3/4
"
Button Head Screws (Item #C)
and (4) 5/16
"
Washers (Item #K) that you removed during
Step 7
.
Place the (4) 5/16
"
Washers over the (4) 5/16
"
X 3/4
"
Button Head Screws - one washer per screw, and insert
the screws and washers into the holes in the bottom of
the Rod Pack Bottom Plate and Rod Pack Frame.
Tighten all hardware from Steps 8 and 9 at this time.
Step 10: Attach the Seat Assembly to the Bench
Assembly
Locate the following items:
• I
tem #12
- Seat Assembly
• I
tem #13
- Bench Assembly
• I
tem #A
- (4) #1/4" X 3/4" Phillips Head Machine Screws
Place the Seat Assembly (Item #12) and the Bench
Assembly (Item #13) onto the floor, cushioned sides facing
down, as shown in
Figure 10
.
Align the four hinge holes on the back of the Bench with
the four holes on the back of the Seat. Insert (4) 1/4" X
3/4" Phillips Head Screws (Item #A) through the lined up
holes
but
do not tighten at this time
!
Figure 9
K
C
10
1
Figure 10
13
Hinge
Holes
12
A
Содержание Fitness Force
Страница 1: ...Assembly Instructions ...
