background image

Schwinn

®

 Force

 Home Gym Hand Grips

The Schwinn® Force™ home gym 

hand grips fit snugly around your 

hands or ankles. Attach the Snap 

Hooks to the D-Rings on the hand 

grips to attach them to the cables.

Regular Grip: 

Grasp the main portion of the
grip without inserting your 
hand through the cuff portion.

Most of the exercises you 
perform utilize this grip.

Hand Cuff Grip: 

Slip your hand through the cuff 
so that the foam pad rests on 
the back of your hand. Grasp 
the remainder of the grip that 
is sitting in your palm.

Ankle Cuff Grip: 

The cuff portion of the grip 
stretches apart from the handle. 
Pull the cuff away from the 
handle, then insert your foot 
and tighten grip around your 
ankle up by pulling the handle 
toward the cuff.

Arch Cuff Grip: 

The cuff opening can also fit 
over the arch of your foot. 
Insert your foot through the 
cuff until it is around the arch 
of your instep, and tighten 
around your heel to secure the grip.

Shoulder Grip: 

Spread open the cuff and 
slide the grip up your arm, 
tightening the grip around your 
shoulder by pulling the handle 
toward the cuff.

How to Use

Your Machine

Folding and Moving the Schwinn

®

 Force

 

Home Gym 

Folding and moving the Schwinn® Force™ home 

gym is easy. Follow the steps below to fold your 

machine. 

1.   Bind the Resistance Rods with the Rod binding 

strap.

2.   Remove the Seat Rail Knob.

3.   Pull out the Locking Pin on the Rail.

4.   Fold the Seat Rail toward the Resistance Rod 

Pack until the Locking Pin clicks into place, 

securing the Rail in the upright position.

5.  Replace the Seat Rail Knob 

Once it’s folded, it’s simple to tilt the Schwinn® 

Force™ home gym back on its transport wheels 

and roll to any location.

Maintenance of Your Schwinn

®

 Force

 

Home Gym

Your Schwinn® Force™ home gym requires little 

maintenance. To keep your Schwinn® Force™ 

home gym in top condition, check all fasteners 

before each workout and tighten as needed. 

Clean the seat with a non-abrasive cleaner after 

each use. This will keep it looking new. Any non-

abrasive household cleaner or soap works well. 

Many automotive interior cleaners make surfaces 

too “slick” and should not be used. 

If you have any questions regarding maintenance 

please call our customer service department at 

1-800-655-8443.

13

Grips manufactured under license agreement with Hands On 

Sports & Gym Accessories, Inc. Patent No. 4756527

Содержание Fitness Force





















Отзывы: