Schwinn Fitness Force, Руководство по сборке

Страница: 13 / 20

11
CONGRATULATIONS! You have completed assembly of your Schwinn
®
Force
TM
home gym!
Step 13: Unwrap the Cables and Tighten Assembly
Using the Rod Cables
For Chest Exercises, attach the Hand Grips to the Chest
Pulleys with the Snap Hooks (Item #P), as shown in
Figure 13a .
Using the Lat Cables
To use the Lat Cross Bar with Pulleys, attach the (2) Lat
Cables (Item #R) to each Rod Cable (Item #Q) at the
Chest Bar Pulleys, using (2) Snap Hooks (Item #P).
Secure the upper end of the Lat Cables to the Hand Grips
(Item #O) or Pull Down Lat Bar (Item #N) with Snap
Hooks, as shown in Figure 13b .
Using the Leg Cable
For Leg Exercises, secure the Leg Cable (Item #S) to the
Rod Cables (Item #Q) using (2) Snap Hooks. Run the Leg
Cables on either side of the Seat/Bench Assembly and Rail,
as shown in Figure 13c .
WARNING: Carefully go over the entire Schwinn®
Force™ home gym assembly, tightening all screws, nuts
and other hardware securely before using your Schwinn
Force home gym.
Assembly Guide
Figure 13a - Rod Cables
Q
Figure 13b - Lat Cables
R
Q
P
Figure 13c - Leg Cables
S
Q