Assembly Guide
7
Step 5: Attach Lat Cross Bar to the Upper Lat Tower
Locate the following items:
• I
tem #7
- Lat Cross Bar with Pulleys
• I
tem #8
- Upper Lat Tower
• I
tem #F
- (2) 3/8" X 2 3/4" Button Head Screws
• I
tem #L
- (4) 3/8" Washers
• I
tem #M
- (2) 3/8" Nylock Nuts
Align the holes in the Lat Cross Bar with Pulleys (Item #7) with
the corresponding holes in the Upper Lat Tower (Item #8). See
Figure 5
for Pulley orientation.
Place (2) 3/8" Washers (Item #L) over the ends of (2) 3/8" X
2 3/4" Button Head Screws (Item #F) - one washer per screw,
and slide the screws through the holes in the Lat Cross Bar
with Pulleys and Upper Lat Tower.
Secure the screws by placing (2) 3/8" Washers and (2) 3/8"
Nylock Nuts (Item #M) over the ends of the screws - one
each per screw - as shown in
Figure 5
, and tightening.
Tighten all hardware from this step.
Step 6: Attach the Upper Lat Tower to the Lower
Locate the following items:
• From
Step 5
- Upper Lat Tower Assembly
• From
Step 4
- Lower Lat Tower (Main) Assembly
• I
tem #D
- (6) 3/8" X 3/4" Button Head Screws
• I
tem #L
- (6) 3/8" Washers
Position the Upper Lat Tower Assembly (from
Step 5
) over
the Lower Lat Tower (Item #1) as shown in
Figure 6
.
Insert the base of the Upper Lat Tower into the top of the
Lower Lat Tower Assembly. Place (6) 3/8" Washers (Item
#L) over the ends of (6) 3/8" X 3/4" Button Head Screws
(Item #D) - one washer per screw. Secure the Upper Lat
Tower to the Lower by inserting the screws into the holes, as
shown in
Figure 6
and tightening.
Note: Do not tighten the screws until all 6 screws are in place.
Figure 5
8
7
M
L
F
Figure 6
8
1
D
L
Содержание Fitness Force
Страница 1: ...Assembly Instructions ...
