SCHUNK SWS-001, Инструкция по установке и эксплуатации

Страница: 8 / 40

Basic safety notes
8 01.00|SWS-001 |en
Notes on particular risks
Generally valid:
• Remove the energy supplies before installation, modification,
maintenance, or adjustment work.
• Make sure that no residual energy remains in the system.
• Do not move parts by hand when the energy supply is con-
nected.
• Do not reach into the open mechanism or the movement area
of the unit.
• Perform maintenance, modifications, and additions outside the
danger zone.
• Secure the product during all operations against uncontrolled
activation.
• Take a precautionary approach by maintenance and disassem-
bly.
• Only specially trained staff should disassemble the product.
WARNING
Risk of injury from objects falling and being ejected
• The danger zone must be surrounded by a safety fence during
operation.
WARNING
Risk of injury when the machine/system moves unexpectedly.
WARNING
Remove all temporary protective materials (caps, plugs, tape,
etc.) on the locking face of Tool Changer and modules prior to
operation.
Failure to do so will result in damage to Tool Changers, modules,
and end-of-arm tooling and could cause injury to personnel.
2.7