SCHUNK SWS-001, Инструкция по установке и эксплуатации

Страница: 20 / 40

Assembly
20 01.00|SWS-001 |en
Wiring and Electrical Connections for Optional Modules
Removable Optional Module
1 Both the SWK and SWA have removable optional modules for
electrical pass-through connections. The electrical connections
have to be soldered to the connection pins.
2 Remove the M2 screw from the optional module using a
1.5mm Allen wrench.
3 Remove the optional module from the SWK or SWA.
Soldering the Electrical Connections
4 Strip the wire the same length as the notch in the pin.
5 Slide a piece of heat shrink tubing over the wire.
6 Solder the wire to the pin.
6.4