SCHUNK SWS-001, Инструкция по установке и эксплуатации

Страница: 21 / 40

Assembly
01.00|SWS-001 |en 21
7 Slide the heat shrink tubing over the soldered connections and
apply heat using a heat gun until the heat shrink restricts
tightly over the connection.
8 Repeat this for all the connections.
9 Replace the optional module to the SWK or SWA and secure
with the M2 screw using a 1.5mm Allen Wrench. Torque to
approximately 0.24 Nm.