SCHUNK SWS-001, Инструкция по установке и эксплуатации

Страница: 9 / 40

Basic safety notes
01.00|SWS-001 |en 9
WARNING
Injury or equipment damage can occur with power or air on.
• Do not perform maintenance or repair on Tool Changer or
modules with power or air on.
• Turn off power and air before performing maintenance or re-
pair on Tool Changer or modules.
WARNING
Failure to keep area clear will result in damage to Tool Changer,
modules, or end-of-arm tooling and could cause injury to per-
sonnel.
• During operation, the area between the quick-change master
SWK and quick-change tool SWA must be kept clear.
WARNING
Using the Tool Changer in applications other than intended will
result in damage to Tool Changer, modules, or end-of-arm tool-
ing and could cause injury to personnel.
• The Tool Changer is only to be used for intended applications
and applications approved by the manufacturer.
CAUTION
The quick-change master SWK locking mechanism must not be
actuated without being mounted to the robot interface plate.
Damage to the Cover Plate and O-ring may result.
• Always attach the quick-change master SWK to the robot in-
terface plate prior to attempting any operations.