SCHUNK SVP-Mini auto, Сборка и руководство по эксплуатации

Страница: 8 / 52

Basic safety notes
8 03.00|Clamping device SVP-Mini auto/SVP-RM auto|en
Basic safety notes
Intended use
The clamping device may only be used for loading and replacing rota-
tionally symmetric tools in TRIBOS-Mini or TRIBOS-RM polygonal jaw
chucks.
• The product may only be used within the scope of its technical da-
ta,
(

3, Page 16) .
• The product is intended for industrial and industry-oriented use.
• Appropriate use of the product includes compliance with all in-
structions in this manual.
Not intended use
• Any utilization that exceeds or differs from the appropriate use is
regarded as misuse.
Not intended use is
• using the clamping device outside or in an ATEX area,
• using the pump on lifting gear or lifting cylinders,
• connecting different hydraulic devices – other than the intended
clamping devices – to the pump.
Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written approval
of SCHUNK.
2
2.1
2.2
2.3