Operation
03.00|Clamping device SVP-Mini auto/SVP-RM auto|en
41
After confirming the entries are shown under the "pro-
gramme" menu.
4 Click on "write to control unit".
The values have been transferred to the pump control. The
programme can now be selected under the "main page" tab.
Selected programme "P02"
Saving the programme contents and importing them again
NOTE
SCHUNK recommends saving the data when the pump is sent to ser-
vice.
1 Click on "save as file".
2 Select a memory location in the data system.
3 Type in file name and save as *.prg.
The data can be imported from the saved file to the pump control
again:
1 Click on "read in from file".
2 Select the *.prg file in the data system.
3 Click on "insert in control programme".
