Design and description
20
03.00|Clamping device SVP-Mini auto/SVP-RM auto|en
Design and description
Design
Design of the clamping device
1 Power supply unit with power
plug
5 Display
2 Remote control unit
6 Hydraulic hose
3 Pump
7 Clamping unit
4 Rotary knob
8 Intermediate sleeve
Description
The polygonal jaw chuck is inserted in the intermediate sleeve (8) of
the clamping unit (7). The pump (3) puts pressure on the clamping
unit. Under pressure the polygon-like clamping diameter is getting
round and the tool can be inserted. After the pressure relief, the
clamping diameter deforms again into a polygon and the tool is
clamped.
• The pump's safety valve is adjusted to 630 bar.
• An electronic pressure sensor is used to monitor the pressure.
• The pump body and all the functional components are made of
tested, high-strength materials. The light and compact pump
housing is made of insulated, shock-resistant, glass-fiber-
reinforced polyamide.
4
4.1
4.2
Functioning
Pump
