Assembly
03.00|Clamping device SVP-Mini auto/SVP-RM auto|en
23
CAUTION
Risk of injury due to falling of heavy parts.
The clamping unit or the bracket may fall down and cause injuries.
• Before assembling the unit, ensure there is enough space for the
erection.
• Wear protective equipment.
Assembling the clamping unit vertically
1 Position the clamping unit with the drill hole (3) on the anti-
rotation device (5).
2 Turn the screw through the drill hole (6) into the thread (2) and
tighten it.
3 Position the bracket on the edge of the workbench and tighten
the clamping screw (7).
4 Remove protective cap (8).
Assembling the clamping unit horizontally
1 Position the bracket on the workbench and tighten the clamping
screw (7).
2 Adjust the drill holes (1) of the clamping unit via the threaded
holes (4) of the bracket.
3 Fasten the clamping unit with screws.
4 Remove protective cap (8).
