Operation
03.00|Clamping device SVP-Mini auto/SVP-RM auto|en
37
Tools with a shank in the forms E or HE:
1 When inserting the tool shank (1), pay attention to the position
of the flattening to the pressure segments in the polygonal jaw
chuck. The round shank of the tool must fit closely to the clamp-
ing surfaces of the polygonal jaw chuck.
Position of the shaft
1
Tool shank
Form DIN 1835 E or DIN 6535 HE
2
Polygonal jaw chuck
NOTE
For further notes regarding tools, see seperate assembly and operat-
ing manual of the TRIBOS polygonal jaw chuck.
