SCHUNK PGB, Сборка и руководство по эксплуатации

Страница: 29 / 52

Assembly
4.2.7 Mount the programmable magnetic switch MMS 22-PI2
CAUTION
Risk of damage to the sensor during assembly!
•
Observe the maximal tightening torque.
NOTE
If there is no T-nut available, slide the sensor according to
dimension I1 into the groove (2),
} 4.2.4 [
/
25] .
1. Turn the sensor (1) into the groove (2).
OR: Slide the sensor (1) into the groove (2) until the sensor (1)
stops at the T-nut (3).
2. Secure the sensor (1) using the set-screw (4).
Tightening torque: 10 Ncm
3. Adjust sensor (1), see sensor assembly and operating manual.
29 13.00 | PGB | Assembly and Operating Manual | en | 389275