Schulte FLX-1510, Руководство оператора

Страница: 71 / 150

OPERATION
FLX-1510 06/18 Operation Section 4-11
© 2018 Alamo Group Inc.
OPERA
T
ION
6.2 Setting Deck Pitch
Mower should be operated with the deck
approximately 3/4" HIGHER IN THE FRONT THAN
THE REAR.
Operating the mower at this pitch will allow the
mower to cut the grass twice and can result in a
more even cut and improved distribution of the cut
material.
IMPORTANT:
Adjust the leveling rods the same amount and
maintain equal tension in the rods. Improper
adjustment may cause rods to snap or bend. Re-
tighten the jamnuts after the deck pitch has been
set.
NOTE: Adjusting the cutter deck higher at the front
can help reduce scalping.
7. DRIVELINE ATTACHMENT
The driveline yoke and tractor PTO shaft must be
dirt free and greased for attachment. To connect the
CV (constant velocity) driveline to the tractor PTO
output shaft, twist driveline yoke collar and align the
grooves and splines of the yoke with those of the
PTO shaft. Push the driveline yoke onto the PTO
shaft, release the locking collar, and position the
yoke until the locking collar balls are seated onto
the PTO shaft. Push and pull the driveline back and
forth several times to ensure a secure attachment.
IMPORTANT: DO NOT use a non-CV tractor shaft.
Driveline damage will occur when turning the
implement.
When attaching the PTO yoke to the Tractor PTO shaft, it is important that the spring
activated locking collar slides freely and the locking balls are seated securely in the groove
of the PTO shaft. A driveline not attached correctly to the Tractor PTO shaft could slip off
and result in personal injury and damage to the cutter.