Schulte FLX-1510, Руководство оператора

Страница: 94 / 150

OPERATION
FLX-1510 06/18 Operation Section 4-34
© 2018 Alamo Group Inc.
OPERA
T
ION
11.6 Shutting Down the Implement
To shut down attached mower, first bring the tractor
to a complete stop. Then slow down the mower by
reducing the engine speed before disengaging the
PTO. Wait for all rotating motion to stop before
proceeding to drive or shut down the tractor.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to the
ground, shut down the engine, remove the key, and
wait for all motion to come to a complete stop
before exiting the tractor.
OPS-FLX-0012
12. DISCONNECTING THE FLEX-ARM & MOWER FROM THE TRACTOR
Before disconnecting the mower and Flex-Arm, the PTO must be disengaged and blade rotation at a complete
stop. Move the mower to a level storage location and lower the center section and both wings to the ground.
If the mower will be stored with the wings in the raised position, install both wing and center section transport
pins. If the mower is not resting securely on the ground, block the mower up securely before attempting to
disconnect it from the tractor.
Use extreme care to keep feet and hands from under the mower and clear of any pinch points when
disconnecting the mower from the tractor.
OPS-FLX-0013
Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches.
(S3PT-15)
Never unhitch without using the Tongue Jack. The Tongue is very heavy. Attempting to lift
the Tongue without using the Tongue Jack could cause strains or other injury. Allowing the
tongue to fall suddenly and unexpectedly could result in crushing injury. Use the Tongue
Jack for lifting the Implement only. Overloading the Tongue Jack can cause failure with
possible serious bodily injury or even death.
(STI-04)