Schuchmann till, Инструкция по эксплуатации, Страница: 32 / 48

32
4.13 Sub-frame with motor support
The sub-frame of
till.
can be optionally
equipped with a motor for height adjustment
for sizes 1+2. It is installed by default for
sizes 3+4, as is the motor for the tilt. In the
standard version the motors are operated
via a mains cable. Optionally
till.
is also
available with an additional battery pack.
The motorised height adjustment for sizes
1+2 and the height and tilt adjustment
operated in the same manner for sizes 3+4
are controlled with a manual controller (
A
).
4.13.1 Instructions for use and safety
• Persons who do not possess the required experience or sufficient
knowledge of the motor components, must not use them.
• Physically and mentally disabled persons may not use the motor
components unless they are supervised or have received thorough
instructions for use from a person responsible for their safety.
• Children must be supervised to ensure that they do not play with the
motor components.
• Anyone connecting, installing or using the system must have access to
these instructions for use.
• The motor components must not be used in the presence of flammable,
anaesthetic mixtures with air, oxygen or nitrogen oxides.
• Do not use any chemicals and carry out an annual inspection for
damage and wear.
• Do not expose the components of the LINAK drive system to UV
radiation disinfection lamps. This can lead to damage to the housing,
carrier parts and cables.
• If you detect any faults, the product must be replaced.
• In order to avoid unintentional movements, prevent that the manual
controller is activated inadvertently, for example during normal use or
maintenance.
• The duty cycle printed on the label of the drive system must always be
observed. If it is exceeded there is the risk of damage to the drive
system. Unless indicated otherwise on the label, the duty cycle is
maximum 10%, maximum 2 minutes continuous operation followed
by an 18-minute break.
4. Accessories.
A