Schuchmann till, Инструкция по эксплуатации, Страница: 31 / 48

31
4.12 Harness
To position the user in
till.
, there is also an
optional wide chest strap, a positioning vest
and the "Pelvi.Loc" pelvic strap in addition
to the chest and pelvis straps in the basic
version (see
Point 3.8
). In general, the
attached harness adapters ( A ), which are
attached to the body profile, can be positioned individually. To do this,
please loosen the respective hexagon socket screws and push the harness
adapters in the profile track to the desired position.
4.12.1 Positioning vest
The positioning vest ( B ) is attached in the
upper area (
C
) and in the lateral area (
D
)
on the harness adapters. The straps of the
positioning vest (
B
) are threaded through
he lateral belt guide on the click buckles.
Afterwards, the click buckles are pressed
down for positioning. The positioning vest is
equipped with four plug locks (
E
) for opening
or closing.
4.12.2 Wide chest strap
The wide chest strap (
F
) is attached in the
upper lateral area on the harness adapters.
The straps of the chest harness are threaded
through the lateral strap guide on the click
buckles. Afterwards, the click buckles are
pressed down for positioning. The chest
harness can be opened or closed using the
plug locks (
G ).
4.12.3 Chest strap from "Pelvi.Loc"
The "Pelvi.loc" chest strap (
H
) is attached
in the lower lateral area on the harness
adapters. The straps of the pelvic harness
are threaded through the strap guide on the
click buckles. Afterwards, the click buckles
are pressed down for positioning. The width
of the pelvic strap can be adjusted via the
closure system. To this end, press one or both safety buckles (
I ) and bring
the strap to the desired width.
4. Accessories.
A
D
C
D
E
E
B
F
G
I
H