Schuchmann till, Инструкция по эксплуатации, Страница: 21 / 48

21
3.8. Harness
To position the user in the
till.
, the basic
model already has a chest strap ( A ) and a
pelvic strap (
B
). Optionally there are also
a positioning vest (see Point 4.12.1 ), a wide
chest strap (see
Point 4.12.2
) and a Pelvi.Loc
pelvic strap (see Point 4.12.3 ).
The chest strap and the pelvic strap can be
adjusted in height and width. To adjust the height, open the catch fastener
on the harness adapter (
C
), pull out the strap and loosen the respective
exposed hexagon socket screw of the harness adapter ( C ). Now you can
push the adapter in the profile track to the desired position.
Tighten all screws again after each adjustment!
3.8.1 Chest strap
The chest strap is attached in the upper
area of the lateral profiles (
D
) at the harness
adapters ( C ). The straps of the chest harness
are guided through the strap guide on the
catch fasteners (
E ) of the harness adapters.
The width adjustment is regulated by means
of this. Subsequently the catch fasteners are
pressed down for fixation. The chest strap
can be opened or closed using the plug lock
(
F
).
3.8.2 Pelvic strap
The chest strap is attached in the lower
area of the lateral profiles (
D
) on the harness
adapters ( C ). The straps of the pelvic harness
are guided through the strap guide on the
catch fasteners (
E ) of the harness adapters.
The width adjustment is regulated by means
of this. Subsequently the catch fasteners are
pressed down for fixation. The pelvic harness
can be opened or closed using the plug lock
(
F
).
Tighten all screws again after each adjustment!
Special hazards concerning the harness, e.g. correct application, possible
strangulation or other injuries!
3. Settings.
A
B
C
D
C
E
F
D
C
E