28
5.0
“Modulamp” Assembly
5.1
“Modulamp” Assembly Removal
1. Turn the power switch to the “Off” position.
2. Remove the fiber optic component.
3. Allow the lamp to cool.
4. Unscrew the “Modulamp” assembly captive thumbscrew until the head springs
forward.
CAUTION: Lamp, lamp socket and surrounding surfaces may be hot!
5. Pull the top of the “Modulamp” assembly forward and lift the unit out of the
recess.
6. Reach into the recess and depress the release lever on the connector.
7. Slide the connector apart and remove the “Modulamp” assembly.
5.2
“Modulamp” Assembly Installation
1. Make sure the power switch is in the “off” position.
2. Slide the connector into the mating receptacle until the release lever clicks into
place.
3. Place the “Modulamp” assembly into the recess with the two bottom “ears”
riding over the bottom edge of the recess first.
4. Slide the “Modulamp” assembly into place.
5. Depress the captive thumbscrew and tighten firmly.
