SCHOTT A20800, Руководство пользователя

Страница: 36 / 44

30
5.3 “Modulamp” Assembly Options
5.3.1 “Modulamp” Assembly Change
The “Modulamp” concept allows a quick change of the lamp, lamp type or
intensity control (iris) by simply exchanging “Modulamp” assemblies.
Modulamp Assembly Part Number
Without Iris A08301 EKE
Position
A08301.1 EJA
Position
A08301.2 DDL
Position
With Iris
A08321 EKE
Position
A08321.1 EJA
Position
A08321.2 DDL
Position
5.3.2 Lamp Type Change
Each “Modulamp” assembly can be adjusted to accommodate any of the three
recommended lamps (EJA, EKE or DDL). Repositioning after changing the lamp
type is very important. It will assure maximum intensity at the fiber optic input.
After removing the “Modulamp” assembly from the housing, note the two sets of
pre-drilled holes provided in the “Modulamp” base. The set closest to the front of
the “Modulamp” assembly provides the correct positioning for the EJA and EKE
lamps. The set furthest from the front of the “Modulamp” assembly is positioned
for the DDL lamp.
To move the lamp holder: remove the two screws holding the lamp holder to the
“Modulamp” base, align the set of holes for the desired position, and screw the
holder back into place.