33
Power Converter Specifications
Rated Power Output
150 Watts
Output Voltage
0.0, 0.5 to 20.5 VDC
Input Voltage Rating, 50/60 Hz.
90 to 265 VAC
Power Factor Correction @ 230VAC, 50Hz
> 0.99 , < 4°
Hold-up Time, nominal AC input, full load
8.3 milliseconds
Line Regulation, over entire input range
+/- 0.5%
Output Current Limit Set Point
8.5 Amps
User Supply (unregulated)
15 VDC @ 100 mA
FCC & VDC - Class A EMI Filter
Yes
PLEASE BE ADVISED:
IN ORDER TO COMPLY WITH EN61000 CLASS A EMISSION
STANDARDS, THE ENCLOSED FERRITE CABLE CLAMP MUST BE INSTALLED ONTO THE
POWER CORD. PLACE THE CABLE CLAMP OVER THE POWER CORD AS CLOSE AS
POSSIBLE TO THE LIGHT SOURCE’S POWER INLET.
NOTE: Improvements may result in specification or feature changes without
notice.
7.2
Replacement Parts List
The following replacement parts are available from SCHOTT to
maintain and support your
“DCR III”
light source:
Part Number
Description
A08110
Lamp - EJA
A08120
Lamp - EKE
A08130
Lamp - DDL
A08126
Fuse 3 A (10) 250VAC
A29506
Lamp Socket , Assy
D08375.026
Decal, Trim Label
D08375.063
Scr, Assy, Thumb, Modulamp
H09050.008
Knob, Control, “DCR III”
H09050.045
Knob, Iris
H09063.002
Cord, Power, IEC, Shielded
D20800.028
Manual, “DCR III”, Technical Reference
D20800.040
EMI Cable Clamp
