45
2. INSTALLATION
2.1 Installation in the cabinet
Pic.1-Pic.2
The warming drawer may only be installed in combination with the devices indicated
as suitable by the manufacturer. The manufacturer does not guarantee trouble-free
use if the device is used in combination with devices other than those indicated by the
manufacturer as suitable.
When installing the warming drawer in combination with another suitable appliance,
the warming
Check that it can support the combined weight of the drawer and the other appliance.
As the combo unit is placed directly above the warming drawer once it is built in, an
intermediate shelf is not required between the two units.
hat the contents of the drawer cannot be seen. This
helps prevent burns from hot food splashes.
There must be enough space to be able to fully open the drawer.
The built-in dimensions for the warming drawer must be added to the built-in
dimensions for the combination device in order to establish the required niche size.
All dimensions provided in this manual are indicated in mm.
2.2 Electrical connection
Before plugging the device into a power outlet, check that the electrical connection
ted on the nameplate (voltage and frequency) match those of
the mains power supply, otherwise the device
electrician if in doubt.
The socket and the on / off switch must remain easily accessible after installation of
the appliance.
