OPERATION
30.30.01.00127/03
www.schmalz.com
EN | 32
WARNING
Risk from uncontrolled gripper movements
This can result in serious injury.
►
Always grip the load in its center of gravity.
►
The workpiece must be loose.
►
The workpiece must not adhere to anything.
►
The workpiece must not be tilted.
ATTENTION
Pivot bearing and bowden cable become damaged and fail, catch flies
open!
Device fails
►
Always grip the load in its center of gravity (+/- 5 cm).
Guiding loads
6.7
WARNING
Risk from uncontrolled gripper movements
This can result in serious injury.
►
Always use the operator handle to move the load, maintain safety distances
►
Do not walk in front of the load
– It is not possible to keep an eye on both the
transport path and the load at the same time, risk of tripping!
The load swings in your direction when horizontal travel is stopped.
►
Always transport loads as close to the ground as possible and adapt the
transport speed to the working conditions.
►
Avoid jerking the lifting device as this could cause the device to rotate or swing.
