Schmalz 10.02.02.05235, Руководство по эксплуатации

Страница: 45 / 72

Installation
EN-US · 30.30.01.01484 · 00 · 01/21 45 / 72
9.4.2 PIN Assignment in IO-Link Mode
PIN assignment, 5-pin M12 connector
M12 connector PIN Wire color
1)
Symbol Function
1 Brown U
S/A
Supply voltage for sensors/actuators
2 White — —
3 Blue GND
S/A
Ground for sensors/actuators
4 Black C/Q IO-Link communication
5 Gray — —
1) When using Schmalz connection cable part no. 21.04.05.00080
9.5 Start of Operations
A typical handling cycle is divided into the following three phases: pickup, blowoff and idle.
To check whether sufficient vacuum has built up, the limit value H2 is monitored by an integrated vacuum
sensor during suction and output to the higher-level controller via OUT.
Phase Switching
step
NC version NO version
Signal Status Signal Status
1 1 IN1 Suction ON IN1 Suction ON
2 OUT Vacuum > H2 OUT Vacuum > H2
2 3 IN1 Suction OFF IN1 Suction OFF
4 IN2 Blow off ON IN2 Blow off ON
3 5 OUT Vacuum <
(H2-h2) OUT Vacuum <
(H2-h2)
6 IN2 Blow off OFF IN2 Blow off OFF
Signal status changes from inactive to active. Signal status changes from active to in-
active.