Schlumbohm 110 0607 Скачать руководство пользователя страница 9

Страница: 9 / 44

Pilot²

Doc. No. 610 2221 v07

- 9 -

(*applicable with the ultrasonic extension module)

Congratulations!

We are delighted you have decided to purchase the

EndoPilot²

. You have made a good

choice. The family-owned company Schlumbohm

has been successful on the dental

industry market for 50 years. These many years of experience, as well as excellent contacts

to specialists, nationally and internationally, allow Schlumbohm

to design outstanding

devices that enable both the patient and the dentist to achieve an optimal treatment result.

In addition to striving, of course, for an optimal treatment result, the focus for each

development is on an easy and most convenient handling.

With

EndoPilot²

, you have acquired a product which has been developed and tested with

the utmost care. The device meets the highest demands with regard to function and operation.

Caution! The device is available in various configuration levels

The EndoPilot² systems can be ordered in different configuration levels:

•

EndoPilot ² comfort

(REF 110 0607)

Endo motor with apex locator

•

EndoPilot ² plus

(REF 110 0609)

Endo motor with apex locator, DownPack and BackFill

•

EndoPilot ² ultra:

(REF 110 0610)

Endo motor with apex locator and ultrasonic extension

•

EndoPilot ² ultra plus:

(REF 110 0611)

Endo motor with apex locator, DownPack, BackFill, ultrasonic

This user manual describes the:

EndoPilot² comfort, EndoPilot² plus, EndoPilot² ultra and EndoPilot² ultra plus.

Devices with less function, as for example the model “EndoPilot² comfort” can be upgraded,

the device must be returned to the manufacturer.

All chapters for the “ultrasonic-function” are marked with:

Manufacturer information:

Schlumbohm GmbH & Co. KG

Phone: 011-49 - 4324 - 8929 - 0

Klein Floyen 8-10

Fax: 011-49 - 4324 - 8929 - 29

D-24616 Brokstedt

[email protected]

Germany

www.schlumbohm.com

WEEE reg. no. DE 88116129

The manufacturer reserves the right to change the information and data contained in this

user manual without prior notice.

This user manual has been prepared with the greatest possible care. However, as errors can

never be fully excluded, we would appreciate any information at any time so we can improve

the documentation for you. Please contact us directly in such an event. Also, should you have

any further questions, please do not hesitate to contact us.

Содержание 110 0607













































Результаты поиска

Содержание 110 0607

Отзывы:

Бренды по названию

Популярные бренды

Schlumbohm 110 0607, Руководство пользователя

Результаты поиска

Содержание 110 0607

Отзывы:

Бренды по названию

Популярные бренды