Schlumbohm 110 0607 Скачать руководство пользователя страница 18

Страница: 18 / 44

Pilot²

- 18 -

2.4.

Touch display

Remove the transport protective film before use. All functions of the EndoPilot² are called up

using the convenient touch display. The touch display allows intuitive and self-explanatory

operation. Operate the touch display with a light touch of the finger. Operation is of course

possible when wearing gloves.

The display must not be operated with metallic objects under any circumstances (risk of glass

breakage)!

With the button, you will always return to the previous menu or back to the start menu.

2.5.

Foot switch

Functions of the wireless foot switch (single-pedal type Single):

•

Starting / Stopping the motor

•

Saving the actual measured root length (see chapter 3.)

•

Activating the EndoPilot² from sleep mode

Additional functions of the optional two-pedal wireless foot switch (type Twin):

•

Tapping on the Select button briefly:

Change to the next instrument.

•

Pressing the Select button for a prolonged period:

Moving between the functions: Ultrasonic and endo motor.

Low batteries may lead to interruption and a loss of function.

Replace low batteries immediately.

Low voltage of the batteries is displayed in the service menu (see chapter 11)

Spare batteries should always be available for uninterrupted operation.

Battery replacement: Please open the battery compartment under the foot switch’s base plate.

Remove the used batteries. Insert new batteries. Pay attention to the prescribed pole

direction. Correctly dispose of the old batteries.

Model: Location: Battery type:

Single

foot switch

Unscrew the base plate 2x 1.5 V, type AAA

Twin foot switch

Battery compartment 2x 1.5 V, type AA

Do not use rechargeable batteries; they have a lower nominal voltage! Only use brand name

batteries and batteries of the same type.

Caution! If the wireless foot switch is not used for a long time, the batteries must be removed.

Bluetooth connection:

The wireless foot switch is already connected to the device on delivery.

If a new foot switch is supposed to be connected to the device, this is possible using the

service menu (see chapter 11).

EMC from outside or other devices could lead to an interruption

Cellphones in the same room should be switched off during usage.

Devices with strong electromagnetic radiation should not stand directly side by side to the

device. Distance between foot-switch and control-unit should be limited to 1,5m.

(for more details see chapter 17 EMC manufacturer`s declaration)

Содержание 110 0607













































Результаты поиска

Содержание 110 0607

Отзывы:

Бренды по названию

Популярные бренды

Schlumbohm 110 0607, Руководство пользователя

Результаты поиска

Содержание 110 0607

Отзывы:

Бренды по названию

Популярные бренды