Settings
P746/EN
ST/G31
MiCOM P746
(ST) 4-
31
ST
Setting Range
Menu Text
Default Setting
Min. Max.
Step Size
Analog. Channel 20
IB-T6/Ix-T16
As above
The Terminal 6 Phase B calculated current is assigned to this channel.
Analog. Channel 21
IC-T6/Ix-T17
As above
The Terminal 6 Phase C calculated current is assigned to this channel.
“DIGITAL INPUT” and “INPUT TRIGGER” submenus
Digital Input 1
Output R1
Any O/P Contacts or Any Opto Inputs or
Internal Digital Signals
The relay 1 output digital channel is assigned to this channel. The digital channel will
trigger the disturbance recorder when the corresponding assigned fault will occur. In this
case, the digital recorder will trigger when the output R1will change.
Following lines indicate default signals for the 32 channels.
Input 1 Trigger
No Trigger
No Trigger, Trigger L/H, Trigger H/L
This digital channel will not trigger the Disturbance recorder. When “Trigger L/H” is
selected, the channel will trigger the disturbance recorder when changing from ‘0’ (low
Level) to ‘1’ (High level). If “Trigger H/L” is selected, it will trigger when changing from ‘1’
(high level) to ‘0’ (low level).
Following lines give default settings up to channel 32.
Digital Input 2
Output R2
As above
The relay 2 output digital channel is assigned to this channel.
Input 2 Trigger
No Trigger
No Trigger, Trigger L/H, Trigger H/L
Digital Input 3
Output R3
As above
Relay 3 output digital channel.
Input 3 Trigger
No Trigger
No Trigger, Trigger L/H, Trigger H/L
Digital Input 4
Output R4
As above
Relay 4 output digital channel.
Input 4 Trigger
No Trigger
No Trigger, Trigger L/H, Trigger H/L
Digital Input 5
Output R5
As above
Relay 5 output digital channel.
Input 5 Trigger
No Trigger
No Trigger, Trigger L/H, Trigger H/L
Digital Input 6
Output R6
As above
Relay 6 output digital channel.
Input 6 Trigger
No Trigger
No Trigger, Trigger L/H, Trigger H/L
Digital Input 7
Output R7
As above
Relay 7 output digital channel.
Input 7 Trigger
No Trigger
No Trigger, Trigger L/H, Trigger H/L
Digital Input 8
Output R8
As above
Relay 8 output digital channel.
Input 8 Trigger
No Trigger
No Trigger, Trigger L/H, Trigger H/L
Digital Input 9
Any Trip
As above
Any trip
Содержание MiCOM P746
