background image

PASCA_TOUCHIT_EN
V02 | 07.2013

91

www.schaerer.com

System

Select "Edit system parameters" (PIN entry required).

Select the "Clear error log" parameter.

A warning message with an entry request appears.

Option 1: Reset the error statistics.

Select the [OK] field.

The error statistics are cleared permanently.

The cleaning statistics are cleared permanently.

Option 2: Retain the settings.

Select the [Cancel] field.

The error and cleaning statistics continue to be available.

Test / calibration

Non stop test

Move brew cylinder

Select the "Test / calibration" system parameter.

Select the "Brew cylinder" submenu.

See "Programming" - "Access".

Non stop test parameters

Display text

Description

Setting range

Notes

1) Number of tests

Sets the number of beverages to be dispen-
sed for a test. 

Enter the desired number of times a bev-
erage is dispensed for a test in the field.

Switch on the parameter for all desired 
beverages using the [ON/OFF] field.

Start the test output(s) using the 

 field.

The selected beverage is dispensed 
the number of time that is preset here.

The window appears with the

The beverages are output in the 
specified sequence.

0-100
All programmed 
beverages

The selection of possible 
beverages depends on the 
system parameter settings 
and the machine equip-
ment.
Interrupt the test output 
using the 

 field. The be-

verage that is currently 
being dispensed is fully 
output.

See "Basic operation"- "SERVICE card" - "Gaining access with the SERVICE card".

Содержание Coffee Art TouchIT



























































































































































Отзывы: