background image

www.schaerer.com

Basic operation

PASCA_TOUCHIT_EN

V02 | 07.2013

24

MONEY B card

MONEY B card 063978/28

With article number 063978 (see first 6 digits).

Chip version SLE28 (see last 2 digits).

Credit card for the Schaerer payment system.

The customer number is checked.

The machine number is not checked.

No PIN entry required.

The following settings must be made so that the MONEY B card can be used:

A payment system must be selected.

A beverage price must be assigned.

The following functions are available:

Together with the PROGRAM card, credit can be added to the card or all of the credit can
be erased.

The MONEY system can be combined with another payment system such as a coin tester.
In this case, the card can also be loaded using the coin tester.

The [Price factor B] parameter in the "Accounting" menu can be used to assign a discount
of up to 100% using the SERVICE card.

MASTER card

MASTER card 063934/28

With article number 063934 (see first 6 digits).

Chip version SLE28 (see last 2 digits).

This card deactivates the current payment system while the card is inserted in the ma-
chine.

The customer number is checked.

The machine number is not checked.

No PIN entry required.

The following settings must be made so that the MASTER card can be used:

This card must be registered on the machine where it is used using the SERVICE card. A
maximum of 20 cards can be registered on the machine. max. 20 Karten auf der Maschine
registrierbar.

A beverage price must be assigned.

See "Accounting" - "MONEY card setup" - "Price factor A" on assigning a discount.

See  "System" - "Chip card service" - "Simulating the PROGRAM card" for a detailed descrip-
tion of the individual menu settings.

See "Accounting" - "MONEY card setup" - "Price factor B" on assigning a discount.

See "System" - "Chip card service" - "Simulating the PROGRAM card" - "Registering the MAS-
TER card".

Содержание Coffee Art TouchIT



























































































































































Отзывы: