Basic operation
PASCA_TOUCHIT_EN
V02 | 07.2013
20
Chip cards
The various chip cards have different access rights and make different functions available. The
main functions of the cards are the following:
•
Following entry of a PIN, the SERVICE card enables full access to the machine control
software, configuration parameters and system parameters.
•
The CHEF card makes it possible to read and partially clear counters and permits limited
access to the product configuration (recipes). The self mode can be switched on and off.
•
The PROGRAM card is used to configure a payment system and the MONEY card.
•
The MONEY cards (A+B) work like credit cards with the possibility of a discount.
•
The MASTER card deactivates the payment system to enable free vending.
•
The CUP card makes it possible to read existing counters.
•
The ROASTER card makes it possible to read and partially clear counters and permits lim-
ited access to the product configuration (recipes).
The following chip cards are described in detail below:
•
CHEF card
•
PROGRAM card
•
MONEY A Card
•
MONEY B Card
•
MASTER card
•
CUP card
•
ROASTER card
CHEF card
CHEF card 063930/28:
•
With article number 063930 (see the first 6 digits).
•
Chip version SLE28 (see the last two digits).
•
No PIN entry required.
•
The customer number is checked.
See "Basic operation" - "SERVICE card" - "Gaining access with the SERVICE card" for addi-
tional information on using the SERVICE card.
See "Service technician menu" - "Accounting" - "Payment systems setup" for activating a pay-
ment system.
See "Service technician menu" - "Accounting" - "MONEY card settings" for the settings of the
MONEY cards.
See "Service technician menu" - "Accounting" - "Accounting system setup" for the settings of
the payment system.
