SCAN 70 gas insert / ZC-fireplace, Инструкция по установке и эксплуатации

Страница: 3 / 64

3
2. Safety precautions
ATTENTION CONSUMER:
In order to ensure safe and effective installation, only a qualified agency, individual, firm, corporation,
or company that is experienced in the installation must install this insert; repair and servicing of this
type of insert and is familiar with the building codes and installation techniques appropriate in your
area. Contact your insert dealer or local gas supplier for the name of a qualified service person.
INSTALLER:
Please read this manual carefully before your begin the installation procedures. Failure to follow in-
structions may result in property damage, bodily injury or loss of life. This manual contains important
user information. Keep this manual with the insert after installation is complete.
Contact your local building officials to obtain a permit and information on any installation restrictions
or inspection requirements in your area.
Notify your insurance company of this insert as well
It is imperative that control compartments, screens, or circulating air passageways of the gas insert is
kept clean and free of obstructions.
These areas provide the air necessary for safe operation.
Do not store or use gasoline or other flammable liquids in the vicinity of this insert.
If the flame becomes sooty dark orange in color or extremely tall, do not operate the insert. Call your
dealer and arrange for proper servicing.
This insert is not for use with solid fuel.
Do not place anything inside the firebox (except the included gas logs, baffle plate and fire back
plates). If the log set is damaged, replace with an original Scan log set.
Do not operate the insert if it is not operating properly in any fashion or if you are uncertain. Call your
dealer for a full explanation of your insert and what to expect.
Do not use this insert if any part has been under water. Immediately call a qualified service technician
to inspect the insert and to replace any part of the control system and any gas control, which has been
under water.
Do not place clothing or other flammable items on or near the insert. Because a thermostat can control
this insert there is a possibility of the heater to turning on and igniting any items placed on or near it.
The viewing glass should only be open for conducting service or maintenance.
Any safety screen or guard removed for servicing must be replaced prior to operating the insert.
Do not operate with the glass removed or damaged.
Operate the insert according to the instructions included in this manual.
If the main burner does not start correctly, turn the gas off at the gas control valve and call your insert
dealer for service.