V5C Technical Manual
Document Number
A-943-MN-04304-0
1
Part Number
9100-31-045-0
1
This manual applies to the V5C Embedded PC, revision A2 and above, until superceded.
Revision Date
by
Comments
05-09-2001
jev
Initial Release
09-19-2001
jev
Updated logo, some typo’s and Power info in specifications.
10-11-2001
jev
Changed Bit 0 & 4 under Reset Control Register on Page 6-3.
11-06-2002
jev
Correction to Keyboard/Mouse connector drawings on Page 3-6
The information contained within this document has been carefully checked and is believed to be
entirely reliable and consistent with the product that it describes. However, no responsibility is
assumed for inaccuracies. SBS Technologies Inc. assumes no liability due to the application or use of
any product or circuit described herein. SBS Technologies Inc. reserves the right to make changes to
any product and product documentation in an effort to improve performance, reliability, or design.
Furthermore, the information contained herein is of a proprietary nature and is not to be reproduced
without prior written consent of SBS Technologies Inc.
Intel, Pentium, Celeron and Pentium III are trademarks of Intel Corporation.
IBM, PC/AT, and AT are trademarks of International Business Machines Corporation.
MS-DOS is a trademark of Microsoft Corporation.
Tundra and Universe are trademarks of Tundra Semiconductor, Inc.
This manual uses some generally accepted conventions for clarity and accuracy. These include:
• The use of an ‘H’ suffix before a number indicates hexadecimal (base sixteen) notation.
• The use of a ‘-’ (minus) suffix to a signal name indicates an active low signal. The signal is either
true when it is at a logic zero level or the signal initiates actions on a high-to-low transition.
• Text in
Courier
Font indicates a command entry or output from an SBS embedded PC product
using its built-in character set.
This manual is designed to provide information regarding the general use and application of the V5C
Embedded PC, as well as detail the hardware design. Some software programming information is also
provided in Chapters 6 and 7 of this manual.
ii
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
