V5C Technical Manual
4-8
IRQ x Assigned To
When resources are controlled manually, assign each sys-
tem interrupt as one of the following types, depending on
the type of device using the interrupt:
LEGACY ISA:
Devices compliant with the original PC AT bus speci-
fication, requiring a specific interrupt (such as IRQ4
for serial port 1).
PCI/ISA PnP:
Devices compliant with the Plug and Play standard,
whether designed for PCI or ISA bus architecture.
DMA x Assigned To
When resources are controlled manually, assign each sys-
tem DMA channel as one of the following types:
LEGACY ISA:
Devices compliant with the original PC AT bus speci-
fication, requiring a specific DMA channel.
PCI/ISA PnP:
Devices compliant with the Plug and Play standard,
whether designed for PCI or ISA bus architecture.
ROM PCI/ISA BIOS (2A6KLU80)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
On-Chip IDE
The integrated peripheral controller contains an IDE
Controller
interface with support for two IDE channels. Select
ENABLED to activate the IDE interface.
On-Chip Primary IDE
: Enabled
OnBoard FDC Controller :Enabled
Master PIO
: Auto
OnBoard UART Port 1
:3F8/IRQ4
Slave PIO
: Auto
OnBoard UART Port 2
:2F8/IRQ3
Master Ultra DMA
: Auto
Slave Ultra DMA
: Auto
On-Chip Secondary IDE
: Enabled
OnBoard Parallel Port
:378/IRQ7
Master PIO
: Auto
Parallel Port Mode
:ECPEPP1.9
Slave PIO
: Auto
ECP Mode Use DMA
:3
Master Ultra DMA
: Auto
Slave Ultra DMA
: Auto
IDE HDD Block Mode
: Enabled
On-Chip USB Controller
: Disabled
Init Display First
: PCI Slot
ESC: Quit
←↑→↓
: Selection
F1 : Help
PU/PD/+/- : Modify
F5 : Old values
(Shift)F2 : Color
F7 : Load Setup Defaults
Integrated Peripherals
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
