V5C Technical Manual
4-6
Boot Up NumLock
Toggle between ON and OFF to control the state of the
Status
NumLock key when the system boots. When toggled
On, the numeric keypad generates numbers instead of
controlling cursor operations.
Typematic Rate
When DISABLED, Typematic Rate and Typematic Delay
Setting
are irrelevant. Keyboard repeats at a rate determined by
the keyboard controller in your system. When this is
ENABLED, you can select Typmatic Rate and Delay.
Typematic Rate
When the Typematic Rate setting is ENABLED, you can
(Chars/Sec)
select a typematic rate (the rate at which a character
repeats when you hold down a key) of 6, 8, 10, 12, 15,
20, 24,or 30 characters per second.
Typematic Delay
When the Typematic Rate setting is ENABLED, you can
(msec)
select a typematic delay (the delay before key strokes
begin to repeat)of 250, 500, 750, or 1000 milliseconds.
Shadow
Software residing in a Read-Only Memory (ROM) is called Firmware. The
Award Software BIOS permits
Shadowing
of firmware such as system BIOS,
video BIOS and similar operating instructions that come with some expansion
peripherals such as a SCSI adapter. Shadowing copies from ROM into system
RAM, where the CPU can read it through the 64-bit DRAM bus. Firmware not
shadowed must be read by the system through the 8-bit X-bus. Shadowing
improves the performance of the system BIOS and similar ROM firmware for
expansion peripherals.
ENABLE shadowing into each section of memory separately.
Video BIOS shadows into memory area C0000-C7FFF. The remaining areas
shown on the BIOS features Setup screen may be occupied by other expansion
card firmware. If an expansion peripheral in your system contains ROM-based
firmware, you need to know the address range the ROM occupies in order to
shadow it correcly into RAM.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
