sauter Equitherm EQJW 125, Руководство пользователя

Страница: 40 / 74

EQJW 125: Heating controller
Operation
7001029003 A
© Fr. Sauter Ltd.
39
4.5.4 Changing and deleting a switching command
Show the switching command as described in the Section on 'Viewing
switching commands',
1. Push the input knob.
•
The switching command is called up.
2. Turn the input knob.
3. Choose whether you want to delete the
switching command (Clr) or change it (SEt).
4. Push the input knob; your selection is
confirmed.
•
If the switching command was deleted, the
next switching command is shown, or
'_ _ _ _' if there are no more switching
commands.
5. For a change (SEt), the rest of the procedure is
as described in the Section on 'Entering a
switching command'.
4.6 Temporary temperature change
1. Set the rotary switch to the party symbol.
2. Turn the input knob; set the duration for the
temperature change
(h = hours, d = days, t = until the next switching
command, minimum 2 h).
3. Push the input knob.
•
The duration is confirmed.
4. Turn the input knob; select the mode
( , or ).
5. Push the input knob.
6. Confirm the mode.
While the time is running down, the remaining time is shown in days, hours or
minutes. After the temporary temperature change has finished, the heating
circuit is again controlled in accordance with the automatic mode.
Use the ESC button or set the rotary switch to another position to cancel the
temporary temperature change function.
e.g.: