sauter Equitherm EQJW 125, Руководство пользователя

Страница: 18 / 74

EQJW 125: Heating controller
Commissioning
7001029003 A
© Fr. Sauter Ltd.
17
3.2.3 Changing SERVice parameters
Push the ESC button to cancel the procedure. The value is not accepted
unless it has already been confirmed.
1. Turn the input knob;
2. Select the SERVice parameter that you want
3. Push the input knob;
•
the value for the parameter is shown
4. Turn the input knob;
•
the value for the parameter is changed
5. Push the input knob;
•
the new value is confirmed
3.2.4 List of SERVice parameters
Parameter Description Range Step value
SP01 Software version Y.XX (read only)
SP02 Device status (error coding, read only) 0…1031 1
SP04 0 Software reset
0 = no reset
1 = default SE + CO parameters
2 = default switching commands
3 = default SE + CO para switching commands
0…3 1
SP05 0 Manual mode
0 = manual mode not enabled
1 = manual mode enabled
0...1 1
SP06 3 Output signal / control model
2 = PWM output
3 = 3-pt output
2...3 1
SP07 0 Room temperature connection
0 = no room temperature detection
1 = connection of NI1000 room sensor
2 = Connection for EGS 52/15 or EGT 333 with room sensor
3 = Connection for EGS 52/15 or EGT 333 w/o room sensor
0...3 1