sauter Equitherm EQJW 125, Руководство пользователя

Страница: 38 / 74

EQJW 125: Heating controller
Operation
7001029003 A
© Fr. Sauter Ltd.
37
4.4.4 Changing and deleting a switching command
Show the switching command as described in the Section on 'View switching
commands',
1. Push the input knob.
•
The switching command is called up.
2. Turn the input knob.
3. Choose whether you want to delete the
switching command (Clr) or change it (SEt).
4. Push the input knob.
•
Your selection is confirmed. If the switching
command was deleted, the next switching
command is shown.
5. For a change, the rest of the procedure is as
described in the Section on 'Entering a
switching command '.
... etc.
4.5 Calendar switching programme
4.5.1 Calling up the calendar switching programme
Before you can work with the calendar programme, it has to be enabled in
SERVice mode (see Section 3.3). The calendar programme can influence
automatic mode over longer periods, in addition to the weekly programme.
The calendar switching programme specifies the dates of periods (e.g. for
holidays) when the weekly switching programme is only enabled up to a
defined mode. A maximum of 20 switching commands (10 periods)
comprising the date and mode are available for this purpose; these can be
entered in the day grid. An 'empty' switching programme is interpreted as a
switching programme in normal mode. The switching commands are captive.
You are recommended to note any change to the calendar switching
programme in the relevant table in Section 14. No commands are entered in
the calendar switching programme in the ex-works setting.
e.g.: