SATELLINE-3AS
User Guide, Version 2.3
76
9.2.4 Changing serial port settings (
Port 1
and
Port 2
)
Press
ý
or
þ
until the cursor >
points to the desired port (in this
example to P
Port 1) and move on
to the submenu by pressing
”SELECT”.
RF frequency
Radio settings
Addressing
>Port 1
Port 2
Handshaking
Additional
Tests
Factory setup
Contrast
EXIT ýþ SELECT
Press
ý
or
þ
until the cursor >
points to the setting to be
modified and then press
”CHANGE”.
>ON
19200 bit/s
8 bit data
None parity
1 stop bit
BACK ýþ Change
MODIFICATION OF PORT STATUS:
Press
ý
or
þ
until the cursor > points to the desired port
status. Confirm selection by pressing ”SET”. The display
will return to the previous (higher) level submenu.
NOTICE: The starting position of the cursor indicates
the previously set value.
>P1 ON / P2 OFF
P1 OFF / P2 ON
CANCEL ýþ SET
MODIFICATION OF DATA TRANSFER SPEED:
Press
ý
or
þ
until the cursor > points to the desired
data transfer speed value (X bit/s). Confirm the selection
by pressing ”SET”. The display will return to the previous
(higher) level submenu.
NOTE: The starting position of the cursor indicates the
previously set value.
300 bit/s
600 bit/s
1200 bit/s
2400 bit/s
4800 bit/s
9600 bit/s
>19200 bit/s
38400 bit/s
CANCEL ýþ SET
MODIFICATION OF THE NUMBER OF DATA BITS:
Press
ý
or
þ
until the cursor > points to the desired
number of data bits (7 or 8 or 9 bit data length).
Confirm the selection by pressing ”SET”. The display will
return to the previous (higher) level submenu.
NOTE: The starting position of the cursor indicates the
previously set value.
7 bit data
>8 bit data
9 bit data
CANCEL ýþ SET
MODIFICATION OF PARITY BITS:
Press
ý
and
þ
until the cursor > points to the desired
parity bit status. Confirm the selection by pressing
”SET”. The display will return to the previous (higher)
level submenu.
NOTE 1: The starting position of the cursor indicates
the previously set value.
NOTE 2: If the number of data bits is set to 9, the value
of parity bits must be set to NONE (no parity).
>None parity
Even parity
Odd parity
CANCEL ýþ SET
