SATELLINE-3AS
User Guide, Version 2.3
63
Serial port 1 stop bits
--------------
1) 1 stop bit
2) 2 stop bits
Enter selection or ESC to previous menu >2
Now all of the modifications of the example have been performed and the new values are
displayed:
Serial port 1
Settings
---------------
1) Port status OFF
2) Data speed 9600 bit/s
3) Data bits 7 bit data
4) Parity bits Odd parity
5) Stop bits 2 stop bits
Enter selection or ESC to previous menu >ESC
The settings of the serial port must be modified to correspond with the settings of the terminal
device that is to be connected to the radio modem. Modification of the settings of serial port
PORT 2 is done according to the principle described above and by first selecting from the main
menu selection ”5”.
NOTE!
It should be noted that switching the radio modem into
Programming Mode
by connecting the
MODE-pin (pin 12 of the D-connector) to ground (GND) will change the settings of serial port
PORT 1 to ”9600,8,N,1” automatically irrespective of the serial port P
PORT 1 DATA-mode
settings.
