SATELLINE-3AS
User Guide, Version 2.3
29
4.2.2 Restoring factory settings
Selecting menu selection “A” may restore factory settings.
Enter selection >A
Restore factory settings
------------------------
Do you want to restore factory settings? (Y/N)>
Factory settings are restored by selecting ”Y” (YES). By pressing any other button current settings
will remain active. The modem will ask this question twice to make ensure that this is a valid
command.
4.3 Display and push buttons (SATELLINE-3ASd (Epic))
SATELLINE-3ASd includes a LCD-display (Liquid Crystal Display) with a backlight. In the
Data
Transfer Mode
the display will show the operating settings of the radio modem, radio field
strength and the charge remaining in the SatelSet-battery. By using the push buttons and the
LCD-display, it is possible to change most of the settings of the radio modem, without the need
for an external terminal. The display backlight illuminates automatically as soon as a button is
pressed
The radio modem will shift into the
Programming Mode
by pressing the SET-UP-push button (
¡
)
The LCD-display will then briefly display the model of the radio modem and the version number
of the installed software, after which the main menu appears which is a listing of the changeable
parameters.
With the help of the main menu, sub-menus can be selected which in turn can be used to
change the settings. You can always return to the previous higher level of the menu structure by
pressing the CANCEL (or BACK) push button. Pressing the
5
or
6
button changes settings.
Selections are confirmed by pressing the SELECT or SET button. In case of numerical values the
digit to be changed is selected by pressing the NEXT button (see following page).
