SATELLINE-3AS
User Guide, Version 2.3
61
9.1.4 Changing serial port settings (
Port 1
and
Port 2
)
The settings of serial port P
PORT 1 can be modified by selecting main menu selection ”4” and
the settings of serial port P
PORT 2 by selecting choice ”5”. In the following example, PORT 1 will
be switched to a non-active state, then the data transfer speed is modified (19200 bit/s
Þ
9600
bit/s), followed by the modification of the number of data bits (8
Þ
7), then the number of
parity bits (NONE
Þ
EVEN) and finally the number of stop bits is changed (1
Þ
2).
Enter selection >4
Serial port 1
Settings
---------------
1) Port status ON
2) Data speed 19200 bit/s
3) Data bits 8 bit data
4) Parity bits None parity
5) Stop bits 1 stop bit
Enter selection or ESC to previous menu >1
Serial ports 1 and 2 status setup
---------------------
1) Port 1 ON / Port 2 OFF
2) Port 1 OFF / Port 2 ON
Enter selection or ESC to previous menu >2
Serial port 1
Settings
---------------
1) Port status OFF
2) Data speed 19200 bit/s
3) Data bits 8 bit data
4) Parity bits None parity
5) Stop bits 1 stop bit
Enter selection or ESC to previous menu >2
Serial port 1 data speed
--------------
1) 300 bit/s
2) 600 bit/s
3) 1200 bit/s
4) 2400 bit/s
5) 4800 bit/s
6) 9600 bit/s
7) 19200 bit/s
8) 38400 bit/s
Enter selection or ESC to previous menu >6
