SATELLINE-3AS
User Guide, Version 2.3
59
9.1.3 Changing addressing settings (primary and secondary RX- and TX-
addresses)
Addressing can be switched ON or OFF with the help of main menu selection ”3”. In the
following example a primary RX-address (transmitter address) is switched ON and the
corresponding hexadecimal address value is modified (”0000”
Þ
”0020”). The current values
of the parameters are displayed and changed in toggle-type fashion by selecting the appropriate
parameter selection number from the list displayed. The next menu level will then enable the
modification of the values (within allowed limits). Modification of all other primary and
secondary transmitter and receiver addresses is done in similar way.
Enter selection >3
Addressing setup
Toggle ON/OFF values. Current value shown.
------------------------------------------
1) RX address OFF
2) TX address OFF
3) RX address to RS port OFF
4) Change primary RX address
5) Change primary TX address
6) Change secondary RX address
7) Change secondary TX address
8) TX address autoswitch OFF
Enter selection or ESC to previous menu >1
Addressing setup
Toggle ON/OFF values. Current value shown.
------------------------------------------
1) RX address ON 0000/0000
2) TX address OFF
3) RX address to RS port OFF
4) Change primary RX address
5) Change primary TX address
6) Change secondary RX address
7) Change secondary TX address
8) TX address autoswitch OFF
Enter selection or ESC to previous menu >4
RX address setup
----------------
RX Address ON 0000/0000
Enter new address (HEX) or ESC to previous menu >0020
