SATEL
INTEGRA
6
•
High-current outputs with polymer fuses
and low-current outputs designed to control
relays, with a programmable operating mode and a possibility to select one of a few
dozens functions.
•
High-current outputs with polymer fuses having power supply output functionality.
•
1 or 2 connectors for voice synthesizers (SM-2 or CA-64 SM).
•
Communication bus (keypad bus) for connection of LCD keypads and some of the
additional modules.
•
1 or 2 communication buses (expander buses) for connection of additional modules to
expand the mainboard functional capabilities. 32 or 64 such modules can be connected to
the control panel.
•
Telephone communicator, provided with a DTMF detection system for reception of
commands via the telephone, as well as for monitoring, messaging, answering calls and
remote programming.
•
RS-232 port enabling the alarm system operation by means of a computer (D
LOAD
X
installer program), interfacing with a printer and the use of an external modem.
•
Switching-mode power supply with short-circuit protection, provided with battery
monitoring and discharged battery disconnection circuit.
•
Independent real time clock with calendar, provided with its own back-up battery.
•
Visual signaling of operation of all outputs, battery charging circuit and telephone
communication unit.
•
Electric protection of all zones, outputs and communication buses.
3.2 LCD keypads
The keypads interacting with INTEGRA control panels are made with or without a built-in
proximity card reader. They have the following features:
•
Large, easy to read 2x16 characters display with permanent or temporary backlighting
activated on pressing a key or by any control panel zone.
•
Keyboard with backlighting controlled in the same way as the display backlighting.
•
2 zones with properties identical to main panel zones.
•
Microswitch for keypad tamper detection.
•
RS-232 port enabling the alarm system to be operated by means of computer (G
UARD
X
supervisory and user program).
3.3 Optional modules
The control panels are equipped with communication buses to allow for addition of expansion
modules, which, along with the firmware updating feature to enhance their functionality,
provides means for an easy upgrading of the system. It enables the system to be expanded
by adding new components in order to better meet individual needs of the customer.
The INTEGRA control panels interact with the CA-64 control panel dedicated modules,
though some of them require a new program version.
3.3.1 Modules to be connected to keypad bus
CA-64 PTSA. Mimic Board.
Enables visualization of the state of partitions/zones in the
security system. The INTEGRA control panels support the mimic boards made in
version CA64T v 1.4 and having firmware in version v4.0 or later.
ETHM-1. Ethernet Module.
Makes it possible to operate the control panel through the
Ethernet. INTEGRA control panels with firmware version 1.04 support ETHM-1 modules
version 1.02 or later.