SATEL
INTEGRA
12
7 -
port RS-232.
It allows local programming and management of the system by means of
D
LOAD
X or G
UARD
X program (the cable for making connection RJ type socket on the
control panel mainboard and the DB9 socket on the computer is supplied by SATEL).
Enables remote programming by means of D
LOAD
X program through TCP/IP network, if
the ETHM-1 module is connected. Makes interfacing possible with an external analog,
GSM or ISDN modem.
8 -
CHARGE LED.
Indicates battery charging.
9 -
MEMORY pins. Never remove jumper from these pins.
Removal of the jumper
results in disconnection of the battery backup for the clock and RAM memory and,
consequently, in loss of the clock settings and all data stored in the RAM memory.
10 -
RESET pins.
In case of emergency, they make it possible to start the STARTER
program, local computer programming function or service mode (see P
ROGRAMMING
manual).
11 -
LEDs.
Indicate status of low-current outputs.
12 -
DIALER LED.
Indicates the status of control panel communicator.
13 -
sockets for voice
synthesizer.
COM +EX DT
CK
CKM
COM
AUX
COM+KPD DTM
OUT2
COM
Z1 COM Z2
Z3 COM Z4
Z5
Z8
COM
Z7
Z6
COM
OUT1
AC
AC
CHARGE
TIP
RING
T-1
R-1
SM-2 VOICE
SYNTHESIZER
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
DIALER
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
RESET
MEMORY
800mA
400mA
BATTERY CHARGE
Fig. 3. INTEGRA 32 control panel mainboard.