Satec PM172 Series, Руководство владельца

Страница: 41 / 49

41
Parameter Offset Type R/W Range
Log parameter #10 ID +9 UINT16 R/W See Table 5-2
Log parameter #11 ID +10 UINT16 R/W See Table 5-2
Log parameter #12 ID +11 UINT16 R/W See Table 5-2
Log parameter #13 ID +12 UINT16 R/W See Table 5-2
Log parameter #14 ID +13 UINT16 R/W See Table 5-2
Log parameter #15 ID +14 UINT16 R/W See Table 5-2
Log parameter #16 ID +15 UINT16 R/W See Table 5-2
1. Parameters that can be selected for data log are listed in Table 5-2. Before setting up the parameters for any data log, the
memory partition must be allocated for the log (see Section 5.19). When writing the data log setup registers, only
parameters that are specified in the partition record setup will be written. When reading registers, those that are not defined
in the data log setup will be read as zeros.
2. If a partition has been allocated as a TOU profile log partition, the data log setup for the partition cannot be written. Write
requests will be ignored. A read request will return identifiers of the TOU season tariff energy registers 28672 to 28687.
5.21 Real Time Clock Registers
Table 5-47 RTC Registers
Parameter Register Type R/W Range
Seconds 4352 UINT16 R/W 0-59
Minutes 4353 UINT16 R/W 0-59
Hour 4354 UINT16 R/W 0-23
Day of month 4355 UINT16 R/W 1-31
Month 4356 UINT16 R/W 1-12
Year 4357 UINT16 R/W 0-99
Day of week 4358 UINT16 R/W 1-7 (1=Sunday)
The day of week is not checked when written. It is set automatically when you change the date.
5.22 Time Zone Information Registers
Table 5-48 Time Zone Registers
Parameter Register Type R/W Range
Daylight savings time (DST) option 4320 UINT16 R/W 0 = disable DST (use standard time only),
1 = enable DST
DST start month 4321 UINT16 R/W 1 - 12
DST start week of the month 4322 UINT16 R/W 1 - 4 = 1st, 2nd, 3rd and 4th week,
5 = the last weekday in the month
DST start weekday 4323 UINT16 R/W 1-7 (1= Sun, 7 = Sat)
DST end month 4324 UINT16 R/W 1 - 12
DST end week of the month 4325 UINT16 R/W 1 - 4 = 1st, 2nd, 3rd and 4th week,
5 = the last weekday in the month
DST end weekday 4326 UINT16 R/W 1-7 (1= Sun, 7 = Sat)
5.23 Communications Password Register
Table 5-49 Password Register
Parameter Register Type R/W Range
Communications password 2575 UINT16 R/W Write: 0 to 65535
Read:
0 = access permitted
65535 = authorization required