Satec PM172 Series, Руководство владельца

Страница: 34 / 49

34
NOTES
1. All digital inputs that were not allocated as pulse inputs will be automatically configured as status inputs.
2. A digital input allocated for the external demand synchronization pulse or time synchronization pulse will be
automatically configured as a pulse input.
Table 5-28 Digital Inputs Allocation Mask
Bit Description
0 Digital input # 1 allocation status
1 Digital input # 2 allocation status
2-15 Not used (read as 0)
Bit meaning: 0 = input is not allocated, 1 = input is allocated to the group
5.14 Timers Setup Registers
Table 5-29 Timers Setup Registers
Parameter Register Type R/W Range
Timer #1 time interval 3300 UINT16 R/W 1-9999 sec, 0 = timer disabled
Timer #2 time interval 3301 UINT16 R/W 1-9999 sec, 0 = timer disabled
5.15 Alarm/Event Setpoints Registers
Table 5-30 Setpoint Registers
Setpoint Setup registers (see Table 5-31)
Setpoint #1 352-395
Setpoint #2 396-439
Setpoint #3 440-483
Setpoint #4 484-527
Setpoint #5 528-571
Setpoint #6 572-615
Setpoint #7 616-659
Setpoint #8 660-703
Setpoint #9 704-747
Setpoint #10 748-791
Setpoint #11 792-835
Setpoint #12 836-879
Setpoint #13 880-923
Setpoint #14 924-967
Setpoint #15 968-1011
Setpoint #16 1012-1055
Table 5-31 Setpoint Setup Registers
Parameter Offset Type Range
Condition #1 Logical operator +0 UINT16 0 = OR
Trigger ID +1 UINT16 see Table 5-32
Reserved +2, 3 UINT16 0 (N/A)
Operate limit +4, 5 INT32 see Table 5-32
Release limit +6, 7 INT32 see Table 5-32
Condition #2 Logical operator +8 UINT16 0 = OR, 1 = AND
Trigger ID +9 UINT16 see Table 5-32
Reserved +10, 11 UINT16 0 (N/A)
Operate limit +12, 13 INT32 see Table 5-32
Release limit +14, 15 INT32 see Table 5-32
Condition #3 Logical operator +16 UINT16 0 = OR, 1 = AND
Trigger ID +17 UINT16 see Table 5-32
Reserved +18, 19 UINT16 0 (N/A)
Operate limit +20, 21 INT32 see Table 5-32
Release limit +22, 23 INT32 see Table 5-32
Condition #4 Logical operator +24 UINT16 0 = OR, 1 = AND
Trigger ID +25 UINT16 see Table 5-32