SASFORKS EXTREME AUTO PROCESSOR Скачать руководство пользователя страница 14

Страница: 14 / 63

SAS/op/proc/forks/op manuals/Ex/EXTREME MANUAL

v16

.pub 3/24/2020

Page 14

S.A.S. of Luxemburg, LLC. 133 Center Drive Hwy 54, PO Box 260, Luxemburg, WI 54217 USA

Phone: 920-845-2307

•

1-877-SAS-FORK

•

Fax: 920-845-2309

•

Web: www.sasforks.com

INSTALLATION OF SAS™ EXTREME™ AUTO PROCESSOR HEAD ASSEMBLY:

INSTALLATION SHOULD BE COMPLETED BY AN EXPERIENCED HEAVY EQUIPMENT MECHANIC

1. Remove existing bucket and inspect pins and bushings.

Replace as needed.

2. Line up palletized head assembly & machine. Image (i).

Note: Head weight approximately:

Model EX-25 & 35: 1,300 kg ( 2,850 lb )

3. Lower stick of excavator down to line up with hole at top of

assembly and insert and secure pin “A” into head assembly.

4. With pin “A” secure in head assembly, lift assembly so that

only the tips of the head assembly are resting on pallet as

shown in image (ii). Align curl linkage to other hole in head

Assembly mount. Insert & secure pin “B” in head assembly.

5. Connect hydraulic hoses.

Hose specification 34 Mpa, 344 Bar (5,000 psi) Min. dia. 19 mm 3/4”

SAS has no responsibility as to performance of excavator’s hydraulic

system with this attachment.

Jaws (Grapple) connection

(EX: v4 & v5 only)

Fittings: #12 BSP

(thread in type) /or/

#16 CODE 62

(4 bolt type)

Flow (Maximum):

130 L/min (35 gpm)

Pressure (Maximum)

31 MPa, 310 Bar

(4,500 psi)

Rotator connection

(EX: v4

& v5 only)

Fittings: #8 BSP

Flow (Maximum)

40 L/min (10 gpm)

Pressure (Maximum)

25 MPa, 250 Bar (3,600 psi)

INSTALLATION: HEAD (PAGE 14)

SAS™ EXTREME™ AUTO PROCESSOR

AFTER INSTALLATION PRIOR TO OPERATION

1. Grease all pivot points with Head and Hold Down resting on ground and machine engine off.

2. Read excavator manufacturer’s manual to identify control levers operation, method to stop mo-

tions, safety parameters related to operation of the excavator with any specialized attachment.

3. Stay clear of pinch points. Slowly engaging controls, test all motions of Head Assembly.

Watch for interference points and stop further motion if interference occurs.

(i)

(ii)

Содержание EXTREME AUTO PROCESSOR
































































Результаты поиска

Содержание EXTREME AUTO PROCESSOR

Отзывы:

Похожие инструкции для EXTREME AUTO PROCESSOR

Бренды по названию

Популярные бренды

SASFORKS EXTREME AUTO PROCESSOR, Руководство пользователя

Результаты поиска

Содержание EXTREME AUTO PROCESSOR

Отзывы:

Похожие инструкции для EXTREME AUTO PROCESSOR

Бренды по названию

Популярные бренды