SASFORKS EXTREME AUTO PROCESSOR, Руководство пользователя

Страница: 10 / 63

SAS/op/proc/forks/op manuals/Ex/EXTREME MANUAL v16 .pub 3/24/2020
Page 10 © 2014-2020 S.A.S. of Luxemburg, LLC.
High pressure hydraulics. Stay clear of pinch points to avoid serious injury. Relieve pressure prior to work.
Follow safety precautions in SAS EXTREME Auto Processor Manual prior to work. www.sasforks.com/safety
Welding can damage excavator electronics.
Read excavator manufacturer’s manual before welding.
Intent is to extend the force back further on x-frame where there is internal support to dissipate the loading forces.
Reference:
1 - OEM hinge base plate existing 5 - NEW lower base plate expansion (two)
2 - NEW hinge base plate expansion (two) 6 - NEW lower load rib extension (four)
3 - NEW inner vertical load rib extension (two) 7 - NEW mid hinge frame tie in plate (one)
4 - NEW outer vertical load rib extension (two)
Upper view Lower view
3 4
1 2
5 6 7
4 7
3
2
1
5
6
INSTALLATION: PREPARATION (PAGE 10)
EXCAVATOR FRAME REINFORCEMENT
POTENTIAL X-FRAME REINFORCEMENTS TO CONSIDER:
Excavator OEM x-frame brackets which mount OEM dozer blade may not provide sufficient distribution of
loads from SAS Extreme Hold Down Arm attachment & may result in x-frame & bracket structural failure.
●Careful consideration of this information will reduce the likelihood of x-frame & x-frame bracket failure.
●Operational advice: Minimize the amount of down force applied when restraining the car, specifically,
avoid pushing down to the extent that the front of the excavator is lifted and suspended.
●This document is not authorization to modify excavator x-frame, it is intended to provide a guide for con-
sideration of reinforcements for Customer, OEM, OEM authorized equipment tech., & professional welder.
NOTICE: Any reinforcement work may cause Excavator OEM warranty, if any, to be void.
●Any reinforcement/modification of x-frame may cause other unintended cracking or damage. SAS is not responsible
for reinforcement installation or performance, or resulting issues, if any.
SAS Limited Warranty applies only to SAS manufactured components, not excavator, x-frame or x-frame brackets.